CD drawing die core
CD wire drawing mold core, both the wear resistance of natural diamond, hardness and good thermal conductivity, but also similar to the toughness of cemented carbide, long service life, high molding efficiency.
Key words:
CD drawing die core
Classification:
Hotline:
CD drawing die core
CD drawing die coreIt not only has the wear resistance, hardness and good thermal conductivity of natural diamond, but also has the toughness similar to cemented carbide, long service life and high molding efficiency.
Suitable for stainless steel wire, hard material. Replace imported products to manufacture high precision wire drawing die.
Heat resistant temperature up to 700 ℃.
Product Schematic Diagram | Specifications and models | Maximum recommended hole diameter | Granularity | |
Blank type | Model | Specification(mm) | Max recommanded hole size (mm) | Grain size |
D6 | 2510 | 0.4 | 5um、10um、25um | |
D12 | 3215 | 1.0 | 5um、10um、25um | |
D15 | 5225 | 1.5 | 5um、10um、25um | |
D18 | 5235 | 2.0 | 5um、10um、25um | |
D6 | 2510 | 0.4 | 5um、10um、25um | |
D12 | 3215 | 1.0 | 5um、10um、25um | |
D15 | 5225 | 1.5 | 5um、10um、25um | |
D18 | 5235 | 2.0 | 5um、10um、25um | |
D21 | 8040 | 3.0 | 5um、10um、25um | |
D24 | 9853 | 4.0 | 5um、10um、25um | |
D27 | 13085 | 5.0 | 10um、25um | |
D30 | 160120 | 7.0 | 25um | |
D12 | 4015 | 1.0 | 5um、10um、25um | |
D15 | 4023 | 1.8 | 5um、10um、25um、50um. | |
D18 | 4029 | 2.3 | 5um、10um、25um 、50um. | |
D21 | 7040 | 3.5 | 5um、10um、25um 、50um. | |
D24 | 7053 | 4.6 | 5um、10um、25um 、50um. | |
D27 | 13086 | 5.8 | 5um、10um、25um 、50um. | |
D30 | 130116 | 7.6 | 10um、25um 、50um. | |
D31 | 150120 | 8.0 | 25um 、50um. | |
D33 | 150150 | 11 | 25um 、50um. |
Previous Page
Next Page
Previous Page
Next Page
Related Products
Consulting