NEWS CENTER

DMI DIAMOND

Design principles of polycrystalline diamond tool manufacturers

Design principles of polycrystalline diamond tool manufacturers (1) reasonable selection of PCD particle size theory, PCD should try to achieve grain refinement, and the distribution of additives between crystals design principles of polycrystalline diamond tool manufacturers (1) reasonable selection of PCD particle size theory, PCD should try to achieve grain refinement, and the distribution of additives between crystals

2023

01-30

How about a brazing knife?

Brazing is the use of lower than the base metal melting point of the metal material as the brazing material, the welding and brazing material heating to higher than the melting point of the brazing material, lower than the melting temperature of the base material, the use of liquid brazing material wetting the base material, filling the joint gap and the base material diffusion to achieve the method of connecting the welding parts.

2023

01-30

Stone carving knife beating reason

The radial runout of the stone carving knife has a great influence on the tool. According to some technical information, when the radial runout increases by 0.01MM, the life of the stone carving tool will be reduced by 50%! So we want to minimize the radial runout of the tool

2023

01-30

< 1 >

DMI DIAMOND

the company's main products in the superhard materials industry: oil/geological/gas drill polycrystalline diamond, wire drawing die blank...

Tianjin Diamond Innovation Co.Ltd .

Telephone:15210602175

Fax: 022-68557487

Mailbox:david@dmidiamond.com
Address: Jindu Steel Factory, Xingjia Village, Dazhuang Town, Jinghai District, Tianjin

Copyright©2023 Tianjin Diamond Innovation Co.Ltd.

Powered by www.300.cn | SEO Tags |

Business License